Motorbike Detailing in Wolverhampton

Motorbike detailing in Wolverhampton, done at your home: a safe foam hand wash, chemical and clay decontamination, two-stage machine correction of the tank and fairings, and your choice of ceramic coating, sealant or wax - with chrome, trim and delicate finishes masked off properly.

Book Motorbike Detailing Get a Free Quote Call 01902 288198

Detailed wheel showing the level of finish applied to motorbike wheels and hubs

12 Steps · 3-6 Hours

The Process

A bike is a car's worth of work in a quarter of the space

Every panel on a bike is on show, most of them are curved, and half of them are next to something you mustn't get compound on. That's why we don't rush it - a full correction and coating is three to six hours.

Clean and prep - wheels, tyres, fenders and a foam hand wash, with the tight areas around the engine and swingarm done by hand.
Decontaminate - chemical iron remover, then clay bar, so the paint is genuinely clean before anything abrasive touches it.
Mask - chrome, trim, decals and matte or soft-touch finishes are taped off.
Correct - two phases: a compound pass to remove swirls and light scratches, then a polish pass for gloss and clarity. This lifts 65-90% of visible defects.
Protect - ceramic coating, or a wax or sealant at no extra cost if you'd rather.
Finish - tyre and trim dressing, glass and screens, and a final inspection under lighting.

Paint correction £175 - £450 Time on site 3 - 6 hours Wax or sealant included Ceramic coating quoted

Priced by size, condition and paint type - a single-colour tank is at the bottom of the range; a full-fairing sports bike with heavy swirls is at the top. Fixed written quote before booking.

After We Leave

Keeping it that way

Correction is permanent - the defects are gone - but a bike lives outdoors and gets washed with whatever's to hand, which is how the swirls got there. A pH-neutral shampoo, a soft mitt and a proper dry will keep a corrected finish looking corrected. A ceramic coating makes that a lot easier, because road grime and chain fling stop bonding to the paint. If you want it looked after, ask about a maintenance visit alongside a car.

Often booked together

Ceramic coatings Paint correction Mobile valeting

Available across Wolverhampton, Walsall, Dudley, Telford, Cannock, Birmingham and the rest of our 30-mile radius.

Questions

Questions people ask

Yes. The tank, fairings, mudguards and wheels can all be coated once corrected. Coating is quoted with the correction; if you'd rather, a wax or sealant is included at no extra cost.

A two-stage correction typically removes 65-90% of visible defects. Deep scratches that have gone through the clear coat can't be polished out and would need paint.

Yes - a driveway, garage or workplace with an outside socket is all we need. We bring the water. A covered space is ideal for coating work.

All FAQs

Ready When You Are

Tell us the bike

Make, model, and a photo of the tank in daylight. We'll tell you what a correction will realistically achieve and what it'll cost.

Get a Free Quote Call 01902 288198